|
|
(1)Vin-Ami -copyright D.Vera 2008 all rights reserved. Wrought Iron Wine Rack. $59. +$12.S/H in the 48 U.S states. Sturdy. Holds magnum or regular wine bottles! aprox. 10" deep 16" wide and 10" tall. Can have stemware rack added. If cabinets have a lip then large 1.5 Ltr. bottles will not fit in the top shelf but regular 750ml bottles will. |
|
|
(2) This handle is about 7-1/2" long and just under 3" wide at the mounting pads. We call it an 8" handle just for convenience. We hand make these handles; so, you can request modifications and additions.$25/pr plus about $7.00 Shipping More info and handles listed below. |
|
|
(2a) Like the handle listed above, This handle is about 7-1/2" long and just under 3" wide at the mounting pads. Called an 8" handle for convenience. We hand make these handles; so, you can request modifications and additions.$20/pr plus about $7.00 Shipping
> |
|
|
(2b) This handle is about 9-1/2" long/high and just under 3" wide at the mounting pads. Called a " scroll handle" for convenience. We hand make these handles; so, you can request modifications and additions.$39.99/pr plus about $12.00 Shipping. Send us an email with: "handles" in the subject line; include your zip code so I can figure shipping more accurately. |
|
|
(3) Choose any paper weight for a limited time they are all priced the same. the all weigh about 10 ozs. Da Horse 1 is about 4-1/2"overall height and 7" in overall length. $9.50 ea. or 2 for $18 or 3 for $25 plus $9s&h.Spray paint: Gloss black is the standard finish; but it doesn't hurt to ask for other colors. Sometimes I can pull it off. $5.50 shipping for one or two; -- three to four will cost $9 to ship. SEND US A SEPERATE EMAIL (or include note with payment) INDICATING YOUR CHOICE OF STYLE(S). If you need 4 or more please don't hesitate to request an invoice; even request an invoice for just 1. All figures are copyright designs of D.Vera 2009.
|
|
|
(4) These Magazine racks are about 10x10x3.5 inches, Wall mount with 2 screws ; $39. +S/H in the 48 U.S states about $9. Spray paint: flat black is the standard finish. Also available in the following paints: Rubbed Oil Bronze; Antique brass, bronze, brown, black, white and almond. Shipping to Canada is about $14. |
|
|
(5) This bracket has a 24" bar for hankging clothes on; is about 7" in overall length; $24. Shipping is about $6 in the 48 U.S states. Spray paint: flat black is the standard finish. Pivots to lay flat against the wall when not in use or nearly flat with some clothes hanging on it.
|
|
|
(6) Wrought Iron Banana Tree has an 8 in. diameter base and is 13-1/2 in. tall. Weighs about 2-3/4 lb. $30 + S&H about $8. Made of heavy solid iron round bars. Available in the colors shown available on the mug tree page. Multiple order? Let's make a deal. contact us; put: multi-B-Tree order, in the Subject line. WE often check email up to midnight.AS OF 8-6-2009 WE ARE NOW CLOSED. DO NOT SEND ANY MONEY OR MAKE ANY PAYMENTS I WILL JUST SEND IT BACK. |
|
|
(7) This Free Standiing Wine Rack can hold 2 bottles of wine regular or magnum and up to 8 wine glasses. It is deliberately made to fit under a 16 inch cleareace above a counter top and under an upper cabinet: $62. + S&H $12.90. Ship-out is 1-4 business days from cleared payment. We made and make this Rack at our shop in Corpus Christi, Texas, USA. Contact us to request different colors or other modifications. For search engine reference, this is a: free standing, counter top, table top iron wine rack wine glass rack.
|
Wrought Iron Entry Door Handles
|
(8) This is a large wrought iron entry door handle. Painted with antique finish. Other finishes available. Made of 5/8" solid Square Bar complimentary opposite twists $85 a pair shipping & Handling is $14. Ship out is 1-3 days from order for a single pair. Similar listing below: lower price @ more time to make and ship. |
|
|
(9) Simple design With Bent Ends 1/2" solid Square Bar $45 /pr. $9. shipping Click image to see photo collage. |
|
|
(10) This extra large handle is about 24" long; measured at the outside of the base mounting pads, and made of 1" pipe; 4" wide at the mounting pads. We hand make these handles so you can request modifications and additions. Be sure to supply hole size (3/16" is the default hole size) and critical specific dimensions. We will happily give you a quote. Typically painted flat black. these sold for $75/pr.+ $19 shipping. SEE NEXT IMAGE BELOW Remember: if you have a confirmed address you can pay with your credit card via PayPal. Request and invoice. We'll send it right away. happy to help you design what you need. |
|
|
(10a) The popularity of the above custom handle has made it necessary to clarify and request the information in the graphic that you can access by clicking on the image to the left. The 18 inch handles shown in the enlargement just sold for $60 a pair. Please don't hesitate to contact me via email at: siwp818@aol.com . We often check email up to midnight.
|
|
|
(11) Heavy 12" Handles with Swaged Mounts These are forged of 5/8" solid square bar. the mounts are arc welded to the solid bar. $69/pr. $14 shipping in U.S. 4-7 days from rct. of payment to shipout (excluding weekends). |
|
|
(12) This 12" 5/8 Solid Bent Handle is made of 5/8" solid square bar. It has smooth bent ends which make for simple lines and a massive look. $80/pr + $14 S&H @ 1-3 day ship-out; $70/pr + S&H.@ 4-7 day ship-out; (excl. wknds.) |
|
|
(13)This is just to show some range of things we make. This is a very small sample. It may give you some ideas. Click on the image to see the large photo then use your "back" button to return to this page. |
|
|
(14) This 5" long Wrought Iron Barn Door or Gate Latch is made of solid 3/8" Square Bar iron rod. Big enough to be manipulated with gloves on. $15 each for one Latch; Plus $5.50 S/H. 12.65 each for 2-10 latches + S&H. Will combine shipping with other items. Can do custom size. Click on image for a photocollage and more info. |
|
|
Click on image for more photos and information:
(15)Use these brackets to make an instant headache rack of any size for your Domestic or Foreign Pick Up Truck. Full size mid size or compact . Screw the clamps on to the bed or clamp them on for light duty work. Use your own judgement to create a sturdy headache rack. Two 8 ft. 2x4s and you'll have lumber left over. We can provide screening panels too see the racks at the "sketches" page. $33/pr without the thumbscrew c-clamps $38 with. $9 shipping. Request a quote for single or multiple orders. Use the contact SIWP button at top of this page. |
|
|
Headache Rack Brackets
|
| visit again! |
